Product range - BIG 20/3 - 27 000 - one-way
BIG 20/3 - 27 000 - one-way tipping semi-trailers
Product Description
The BIG semi-trailers serve for transport of agricultural products on different ground conditions, they have a steel structure. The chassis frame is built up of a weldment from hollow sections reinforced with walls. There is a hydraulic telescopic lever-jack in the frame. The frame is located on Bogie chassis, its design enables to run over the land irregularities. The axles are suspended with leaf springs. The back steer axle improves the manoeuvrability on the ground and reduces the tyre wear. The body is made from steel and it is equipped with a spine frame. The metal sheet thickness for side-gates makes 4 mm and for floor makes 5 mm. The rounded edges simplify the discharge of products. Kombinace hydraulického otevírání vrat a dvoukřídlých vrat umožňují jak přepravu sypkých materiálů, tak i materiálu delších než délka ložné plochy.
Technical Parameters:
| Technical Information: | |
|---|---|
| Highest authorized speed (km/hour.) | 40 |
| Axle producers | BPW |
| Axle number (pc) | 3 |
| Axle - type | One axle Tridem |
| Axle - number of leaf springs (pc) | 3 |
| Axle - track width (mm) | 1 950 |
| Axle base (mm) | 1 400 |
| Overrun brake | air brake, two hoses including automatic control |
| Park brake system | Automatic spring |
| Brake lining (mm) | 400 x 120 |
| Tyres | 18 R 22.5 |
| Wheel rims | 14 x 22.5 |
| Drawbars with diameter of (mm) | 50 |
| Drawbars - number of spring-loaded leafs (pc) | 13 |
| Central locking of back door | ne |
| Number of degrees on hydraulic cylinder (pc) | 5 |
| Bottom tow of the agricultural tractor | yes |
| Tailboard at back door | yes |
| Weights: | |
|---|---|
| Total weight (kg) | 25 000 |
| Service weight (kg) | 7 000 |
| Payload (kg) | 18 000 |
| Drawbar load (empty / loaded kg) | 700/2 500 |
| Basic dimensions: | |
|---|---|
| Maximal length (mm)) | 9 050 |
| Maximal width (mm) | 2 550 |
| Length of rear dump body (mm) | 7 050 |
| Width of rear dump body (mm) | 2 175 |
| Height of rear dump body above ground (mm) | 1 475 |
| Height of basic side gate (mm) | 1 500 |
| Height of side gate incl. extension boards (mm) | 2 100 |
| Body volume in basic version (m3) | 22 |
| Body volume with extension boards (m3) | 32 |
| Angel when tipping back door (°) | 50 |
Standard package in price:
- Massive body, height of 1500 mm without extension boards
- 1. a 3. zadní Steer axle
- Hydraulic opening of back door
- Grain door in back door
- Sealed door with steel collar and rubber section
- External ladder on body and chassis
- Internal stand-pipe in the front part of body
- Eye sight in body part
- Prepared for extension boards
- Chassis
- Spring-loaded drawbars with adjustable height
- Rigid towing attachment of 50 mm vertical load of 3000 kg
- Dumping hydraulic drawbar rod including manual pump
- Massive tipping hydraulic cylinder
- Spring-loader Bogie ADR, BPW axles
- Two hoses air brakes of Knorr Bremse
- Automatic setting of brake pressure
- Automatic Park brake
- Complete wheels 18R 22,5
- Plastic rearguard
- Voltage 12 V
- Rear tow (without outgoing circuit)
Equipment at extra cost:
- Replaceable tow 50
- Replaceable tow K 80
- Haylage extension boards of 600 mm
- Tarpaulin
- Tarpaulin by rolling + walkway
- 6x wheels 560/60R 22,5 MITAS AR 02
- 6x wheels 560/60R 22,5 ALIANCE 380
- 6x wheels 560/60R 22,5 MICHELIN CARGOXBIB
- Polyurethan varnish
The worm-conveyors can be completed in various capacities and lengths.
Price: on request info@big-navesy.cz
Delivery time of the machine: on the stock at S-PROFIT OPAVA s.r.o. (otherwise within three weeks from the order)
Warranty: 12 months for a concerned machine given by the Seller.
Maintenance service: provides consulting, pre-sale service and all repairs (within and after guarantee time) S-PROFIT OPAVA s.r.o.